产品介绍：

循环时间业内最快，生产效率具有压倒性优势

最高转速3200rpm（JM-438D）由于采用了电脑直接驱动方式，起动/停车反应迅速。与传统机型相比机器时间缩短了约27%，使生产效率得到了进一步的提高。缝制物定位容易、正确枱压脚装置由脉冲马达驱动，枱压脚高度设定为2阶段。缝制物定位容易，大大缩短了设定时间。此外，可适当轻轻操作踏板，踏板回踏时反应极佳。降压脚噪音也得到大幅度降低，可轻松的进行作业。

切线后无需进行再处理

为使余线长度最短，采用了专用的移动刀和固定刀，并将固定刀配置在靠近布料的位置。切线后，线头余线长度为2~5mm，无需再进行摘线工序。

Product Introduction：

Quickest circulation time in the industry,higher production effciency

Max Sewing speed 3200rpm(JM-438D) further enhanced production efficiency easy and exact orientation of sewing material, presser foot device controlled bu impulse motor, and height of presser foot set lor 2 stages to achieve easy sewing malerial orienlaslion and reduced set time, and press operating padel slightly, its response is very good and noise is much more reduced as well.

Unnecessary to redo
After being cut in orde to get shortest end of thread , special moving knife and fixed knife are applied , and put the fixed knile be aside sewing material.
After being cut, end of thread is of 2-2.5mm lenglh and unnecessary to redo it.